Hi Friends, I'm listing down all the names of Softwares which used inside the Engineering-Drawing Domain {Mechanical Engineering; Big-and-Small Plants Design; Biggest, Very-Big, Heavy, Bigger, Big, Medium, Light-Weight, Small Machineries Design etc.} and Later-on Write the-details on right-window on this webpage.
Friends, Engineering Drawing is very important for the professionals who have the passion in knowing how you draw the layout of anything on which later-on the Government or any Private-firm invests their Time-&-Money to undergone the construction based-on that layout (must be approved by the top-seniors personnel of the company or organisation).
To start engineering drawing, a student needs a foundational set of drafting tools designed to ensure precision, accuracy, and consistency in technical sketches. The essential equipment includes a drawing board, a method for drawing straight lines (mini-drafter or T-square), instruments for creating circles and angles (compass and protractor), set squares, and specific drawing pencils.
Here is a detailed list of the essential equipment for a beginner in engineering drawing:
Drawing Surface and Support
- Drawing Board: A flat, smooth wooden or plastic board, typically A2 or A1 size, used to hold the paper.
- Drawing Sheets: High-quality white paper (usually A2 size, sometimes A3 for practice) with a smooth surface.
- Board Clips/Pins/Adhesive Tape: To firmly fix the drawing sheet to the board.
Drafting and Measuring Instruments
- Mini Drafter: An essential tool that combines the functions of a T-square, set squares, scales, and a protractor, allowing for parallel, perpendicular, and angular lines.
- Set Squares (30°/60° and 45°): Two transparent plastic triangular tools used to draw vertical and inclined lines (parallel or perpendicular to the drawing).
- Compass: A tool for drawing circles and arcs. It is recommended to have a set screw in the center to hold the size accurately.
- Divider: Used to transfer measurements or divide lines into equal parts.
- Protractor: For measuring and marking angles from 0° to 180° (or 360°).
- Scales/Ruler (15cm or 30cm): A standard ruler, or preferably an engineering scale (triangular or flat) with precise markings.
- Roller Scale: An alternative to the mini-drafter, which is convenient for drawing parallel lines and hatching.
Drafting Pencils and Erasers
- Drawing Pencils (Graded): Essential grades include H (hard, for object lines), 2H (harder, for construction/projection lines), and HB (for lettering and final drawings).
- Mechanical Pencils (0.5mm/0.7mm/2mm): Widely used for consistent line width. A 2mm pencil is robust, while 0.5mm is common for finer work.
- Eraser: A high-quality, soft, non-dust eraser.
- Sharpener: A good quality sharpener, especially if using standard wooden pencils or 2mm clutch pencils.
Optional but Useful Tools
- French Curves: Used for drawing smooth irregular curves.
- Engineering Templates: Plastic templates for drawing small circles, polygons, or lettering efficiently.
- Sand Paper/Emery Paper: To sharpen the pencil lead to a long cone shape.
- Calculator: Essential for calculating dimensions, particularly in engineering graphics.
Tips for Beginners:
- Avoid HB pencils for construction lines as they make the drawing messy and are hard to erase. Use 2H or 3H for light, preliminary lines.
- A Mini Drafter is generally considered more efficient than a T-square for complex, first-year engineering drawings.
To start engineering drawing, you need a combination of drafting instruments for precision, specialized paper, and marking tools. While modern engineering often uses CAD software like AutoCAD, foundational courses typically require manual drafting equipment to teach geometric principles.
Core Drafting Instruments
These tools ensure your lines are perfectly straight, at correct angles, and accurately scaled.
Marking and Correction Tools
Precision in line weight is vital in engineering graphics, which requires specific pencil grades.
- Pencils (Grades H, 2H, HB):
- 2H/3H: Used for light construction and dimension lines.
- H: Used for object lines and lettering.
- HB: Used for boundaries and final dimensioning.
- Eraser & Erasing Shield: Use a soft, non-dust eraser to avoid smudging. An erasing shield helps you erase specific lines without disturbing nearby work.
- Sharpener: Necessary for maintaining a fine point on wooden pencils.
Accessories and Supplies
- Drawing Sheets: High-quality white paper (common sizes include A2, A3, or imperial half-sheets).
- Sheet Fasteners: Drawing clips or masking tape to secure the paper firmly to the board.
- Sheet Container: A plastic tube used to transport finished drawings without creasing them.
- Drafting Brush: Used to sweep away eraser crumbs without smudging the graphite.
- Mini Drafter: A critical tool that combines the functions of a T-square, set squares, and a protractor to draw horizontal, vertical, and inclined lines.
- Drawing Board: A flat, smooth surface (often made of softwood) to support your drawing sheet.
- Set Squares: A pair of triangular rulers (30°/60° and 45°) used for drawing angled and perpendicular lines.
- Compass & Divider: A compass is used for drawing circles and arcs; a divider is used to step off equal distances or transfer measurements.
- Protractor: Essential for measuring and marking specific angles.
- Scale Ruler: A ruler with various scale ratios (e.g., 1:1, 1:100) to represent large objects on small paper.
- French Curves: Plastic templates used to draw smooth, non-circular curves.
Now as I said, from time-to-time I add details to below-points in coming-time.
- SolidWorks (Dassault Systèmes)
- Autodesk Inventor
- CATIA
- PTC Creo (formerly Pro/ENGINEER)
- Autodesk Fusion (formerly Fusion 360)
- Siemens NX
- Solid Edge (Siemens)
- Onshape
- Alibre Design
- IronCAD
- KeyCreator
- ZWCAD
- T-FLEX CAD
- VariCAD
- TopSolid
- Cimatron
- SpaceClaim
- Cobalt (Ashlar-Vellum)
- BricsCAD Mechanical
- MechDesigner
- SolidThinking
- Cadwork Engineer
- Delcam
- Mastercam
- Tebis
- AutoCAD
- Autodesk Revit
- Bentley MicroStation
- ArchiCAD (Graphisoft)
- AutoCAD Civil 3D
- Vectorworks
- Tekla Structures
- AutoCAD Architecture
- Allplan
- Chief Architect
- DataCAD
- Smart3D (Hexagon)
- AVEVA E3D
- CADWORX
- PDMS (AVEVA)
- ETABS
- STAAD.Pro
- SAP2000
- Digital Project (Gehry Technologies)
- OpenRoads (Bentley)
- OpenBridge (Bentley)
- HydroCAD
- FINE MEP
- OrthoGraph
- Magicplan
- Altium Designer
- Autodesk Alias
- Rhinoceros 3D (Rhino)
- Grasshopper 3D (Rhino plugin)
- OrCAD
- Proteus Design Suite
- NI Multisim
- EAGLE (Autodesk)
- Pulsonix
- AVSnap
- Elecdes Design Suite
- ETAP
- AutoTURN
- Motor-CAD
- ArtiosCAD
- Rockworks
- Caesar II (Piping)
- Spoolgen
- ICEM Surf
- PlanCAD
- 3Shape (Dental)
- Marvelous Designer
- Matrix (Jewelry)
- InCa3D
- C3D Toolkit (Kernel/SDK)
- FreeCAD
- LibreCAD
- OpenSCAD
- Tinkercad (Autodesk)
- Blender
- QCAD
- SolveSpace
- BRL-CAD
- DraftSight
- SelfCAD
- LeoCAD
- Gmsh
- Salome
- MeshLab
- MeshMixer
- ANSYS
- COMSOL Multiphysics
- MATLAB / Simulink
- Abaqus
- Nastran (MSC/"https://www.autodesk.com/")
- Navisworks
- MapleSim
- Simcenter Amesim
- OpenFOAM
- Recap Pro
- AVEVA Marine
- ShipConstructor (SSI)
- FORAN (Sener)
- Maxsurf (Bentley)
- Orca3D (Rhino plugin)
- NAPA (Ship design)
- AutoShip
- Paramarine
- RhinoMarine
- Cadmatic Marine
- KiCad (Open Source)
- Zuken CR-8000
- Mentor Graphics Xpedition
- Cadence Allegro
- EPLAN Electric P8
- SolidWorks Electrical
- AutoCAD Electrical
- DipTrace
- EasyEDA
- Fritzing
- DesignSpark PCB
- PADS Professional
- CircuitStudio
- CADSTAR
- TinyCAD
- Proficy Machine Edition
- SkyCAD Electrical
- Automation Studio
- IGE+XAO SEE Electrical
- CadeSimu
- Bentley OpenPlant
- Intergraph SmartPlant P&ID
- M4 P&ID
- Piping Systems FluidFlow
- AutoPLANT (Bentley)
- ESApro
- Plant-4D
- COMOS (Siemens)
- Smap3D Plant Design
- VPE Control
- Advance Steel (Autodesk)
- Robot Structural Analysis (Autodesk)
- Graitec OMD
- SDS2 (Steel Detailing)
- RISA-3D
- Midas Civil
- ProtaStructure
- Scia Engineer
- Dlubal RFEM
- Advance Design
- StruCAD
- RAM Structural System
- CYPECAD
- Idea Statica
- Tower Numerics (TnxTower)
- Global Mapper
- ArcGIS Pro (Esri)
- QGIS (Open Source)
- Surfer (Golden Software)
- Plex-Earth
- Carlson Software
- MapInfo Pro
- Trimble Business Center
- Leica Infinity
- Topcon Magnet Office
- Autodesk VRED
- Icem Surf
- VISSIM (Traffic simulation)
- Sidra Intersection
- Transoft Solutions AutoTURN
- GibbsCAM
- Surfcam
- FeatureCAM
- Edgecam
- SprutCAM
- WorkNC
- BobCAD-CAM
- VisualCAD/CAM
- Hypermill
- OneCNC
- NanoCAD
- ProgeCAD
- GstarCAD
- TurboCAD
- CorelCAD
- CMS IntelliCAD
- ARES Commander
- Draft IT
- CADopia
- Ashampoo 3D CAD
- Altair Inspire
- Flow-3D
- LS-DYNA
- Star-CCM+
- MSC Adams
- HELYX
- SimScale (Web-based)
- NTopology
- Ansys Discovery
- Wolfram System Modeler
- ESPRIT (Hexagon)
- NCG CAM
- PowerMill (Autodesk)
- CAMWorks
- HyperMill (Open Mind)
- ZW3D
- GO2cam
- Mayka
- CimatronE
- VISI Modelling
- EurekaMesh
- VERICUT
- NCSIMUL
- PartMaker
- FeatureCAM
- BobCAD-CAM
- VisualCAM
- MecSoft VisualCAD
- SheetCam
- Estlcam
- CAMBAM
- HeeksCAD
- PyCAM
- OpenCAM
- DXF2GCODE
- GRBL Plotter
- Universal G-code Sender
- Mach3
- Mach4
- LinuxCNC
- Easel (Inventables)
- Carveco
- Vectric VCarve
- Aspire (Vectric)
- Cut2D
- PhotoVCarve
- MeshCAM
- DeskProto
- KHK Gear Design
- MITCalc
- KISSsoft (Gear design)
- GearTrax
- CycDesign
- G-Wizard
- Camotics
- Predator CNC Editor
- Cimco Edit
- NC Viewer
- DNC-Max
- Scantech
- Geomagic Design X
- Geomagic Control X
- Artec Studio
- PolyWorks
- GOM Inspect
- VGSTUDIO MAX
- Volume Graphics
- 3D Systems Design Direct
- SolidThinking Evolve
- Altair Inspire Render
- KeyShot
- V-Ray for Rhino
- Maxwell Render
- OctaneRender
- Redshift
- LuxCoreRender
- Modo
- LightWave 3D
- ZBrush (Engineering sculpting)
- 3D-Coat
- Mudbox
- Magics (Materialise)
- Netfabb (Autodesk)
- 3MF Console
- Slic3r
- Cura
- PrusaSlicer
- Simplify3D
- ChiTuBox
- Formware
- Lychee Slicer
- IdeaMaker
- Z-SUITE
- PreForm
- Eiger (Markforged)
- GrabCAD Print
- 3DPrintCloud
- Authentise
- Link3D
- AMFG
- 3YOURMIND
- Dyndrite
- Oqton
- Hexagon MSC Apex
- MSC Patran
- Siemens Femap
- Altair HyperMesh
- SimLab
- EnSight
- ParaView
- InfraWorks (Autodesk)
- OpenSite Designer
- OpenRail Designer
- MicroStation PowerDraft
- GEOPAK
- InRoads
- MXROAD
- SiteOPS
- ContextCapture
- Orbit GT
- LumenRT
- SYNCHRO 4D
- Trimble Novapoint
- Quadri
- Tekla Tedds
- Tekla Structural Designer
- Trimble RealWorks
- Trimble Business Center
- FieldPoints
- Topcon Magnet Field
- Magnet Office
- Pocket 3D
- Civil Site Design
- 12d Model
- LISCAD
- n4ce
- SCC Survey
- KeyTERRA-FIRMA
- BricsCAD BIM
- BricsCAD Civil
- GeoMedia
- ERDAS IMAGINE
- Envi
- PCI Geomatica
- Saga GIS
- Grass GIS
- WhiteboxTools
- MapWindow GIS
- TatukGIS
- Global Mapper
- Bluebeam Revu
- PlanGrid
- Procore
- Aconex
- Newforma
- Dalux
- Fieldwire
- BIM Track
- Revizto
- Enscape
- Twinmotion
- Lumion
- Fuzor
- IrisVR
- The Wild
- Unity Reflect
- Unreal Engine for AEC
- HEC-RAS
- HEC-HMS
- SWMM (EPA)
- InfoWorks ICM
- WaterGEMS
- SewerGEMS
- StormCAD
- Hammer (Bentley)
- CivilStorm
- CulvertMaster
- FlowMaster
- PondPack
- SewerCAD
- WaterCAD
- Mike+ (DHI)
- Mike 21
- Mike 11
- TUFLOW
- FloodModeller
- XP-SWMM
- Innovyze InfoDrainage
- Autodesk Storm and Sanitary Analysis
- Autodesk River and Flood Analysis
- GeoHECRAS
- GeoHECHMS
- Aquis (Schneider Electric)
- Termis
- Pipe-Flo
- AFT Fathom
- AFT Arrow
- AFT Impulse
- Bentley AutoPIPE
- CAESAR II
- ROHR2
- TRIFLEX
- PASS/START-PROF
- PlantWise
- SupportModeler
- Isogen
- PDS (Intergraph)
- SmartPlant 3D
- CADWorx Plant Professional
- CADWorx Structure
- Cadence Virtuoso
- Cadence Innovus
- Cadence Genus
- Synopsys Design Compiler
- Synopsys IC Compiler II
- Mentor Calibre
- Mentor Tessent
- Ansys HFSS
- Ansys Maxwell
- Ansys Icepak
- Ansys SIwave
- CST Studio Suite
- FEKO
- ADS (Advanced Design System)
- Keysight Genesys
- Keysight SystemVue
- AWR Microwave Office
- Sonnet Software
- Remcom XFdtd
- Empire XPU
- Speag SEMCAD X
- Zuken CR-5000
- Zuken E3.series
- Harness XC
- Capital (Mentor)
- VeSys
- SolidEdge Wiring Design
- RapidHarness
- Arcadia (Cadonix)
- Cebos
- Pulsonix
- Protel (Legacy Altium)
- Altium Concord Pro
- Upverter
- Flux.ai
- CircuitMaker
- Target 3001!
- PCB Artist
- ExpressPCB
- Pad2Pad
- FreePCB
- Osmond PCB
- PCB Elegance
- GEDA
- XCircuit
- Magic VLSI
- Electric VLSI
- KLayout
- LTspice
- PSpice
- TINA-TI
- Micro-Cap
- Simetrix
- Sapwin
- QUCS
- NGSpice
- Xyce
- SmartSpice
- HSpice
- Spectre
- FastCap
- FastHenry
- OpenRAM
- OpenLane
- Magic VLSI
- Xschem
- Netgen
- Icarus Verilog
- Verilator
- GTKWave
- ModelSim
- Questa
- Vivado (Xilinx)
- Quartus (Intel)
- Libero SoC (Microchip)
- Lattice Diamond
- GoHDL
- Yosys
- SymbiFlow
- Sigasi Studio
- TerosHDL
- Doulos
- HDL Works
- Aldec Active-HDL
- Riviera-PRO
- BlueSpec
- Chisel
- SpinalHDL
- Cocotb
- UVM (Universal Verification Methodology)
- OSVVM
- UVVM
- PowerFactory (DIgSILENT)
- PSS/E (Siemens)
- CYME (Eaton)
- EasyPower
- SKM Power*Tools
- NEPLAN
- Milsoft Windmil
- OpenDSS
- LS-PrePost
- Pam-Crash
- Radioss
- Dytran
- Actran (Acoustics)
- Adams Car
- Adams Rail
- MotionSolve
- RecurDyn
- Simpack
- Chrono
- Dymola
- SimulationX
- MapleSim
- 20-sim
- AMESim
- GT-SUITE
- AVL FIRE
- AVL BOOST
- AVL CRUISE
- Ricardo WAVE
- Ricardo IGNITE
- Ricardo VECTIS
- Converge CFD
- Star-CD
- FieldView
- Tecplot 360
- Pointwise
- ICEM CFD
- Gridgen
- SnappyHexMesh
- EnGrid
- Helyx-OS
- SU2
- M-SASH
- XFOIL
- Profili
- JavaFoil
- OpenVSP (NASA)
- CEASIOM
- Pacelab WEED
- FlightStream
- AAA (Advanced Aircraft Analysis)
- RDS-Win
- SharkCAD
- ViaCAD
- PowerCADD
- HighDesign
- RealCADD
- MacDraft
- EazyDraw
- ConceptDraw DIAGRAM
- SmartDraw
- Lucidchart
- Visio
- Draw.io
- OmniGraffle
- Dia
- Inkscape (Technical use)
- CorelDRAW Technical Suite
- Canvas X
- Affinity Designer (Technical use)
- Xara Designer Pro
- Adobe Illustrator (Technical use)
- CADTools (Illustrator plugin)
- Hot Door Control
- DraftingClinic
- GTX RasterCAD
- WiseImage
- Scan2CAD
- Vector Magic
- Potrace
- Deneba Canvas
- Micrografx Designer (Legacy)
- Generic CADD (Legacy)
- Foresight
- DesignCAD
- TurboCAD Mac
- Punch! CAD
- Encore CAD
- FloorPlan 3D
- Home Designer
- Sweet Home 3D
- RoomSketcher
- Planner 5D
- Floorplanner
- Cedreo
- SketchUp Free
- SketchUp Pro
- SketchUp Shop
- LayOut (SketchUp)
- V-Ray for SketchUp
- Thea Render
- Twilight Render
- Shaderlight
- Podium
- D5 Render
- Chaos Vantage
- Artlantis
- Piranesi
- Surpac (Dassault)
- MineSched
- Whittle
- Vulcan (Maptek)
- Micromine
- Leapfrog Geo
- Deswik
- Datamine Studio
- MineSight (Hexagon)
- Minex
- Carlson Mining
- Promine
- Studio RM
- Blast-Ex
- JKSimMet
- AggFlow
- MetSim
- SysCAD
- Aspen HYSYS
- Aspen Plus
- Aspen EDR
- PRO/II (AVEVA)
- DYNSIM
- Petro-SIM
- UniSim Design (Honeywell)
- DWSIM (Open Source)
- COFE (CAPE-OPEN)
- CHEMCAD
- gPROMS
- SuperPro Designer
- SchedulePro
- VMGSim
- SimCentral
- ProMax
- Picasim
- FLARESIM
- PHAST
- Safeti
- Exsilentia
- Kenexis Effigy
- Sherpa
- CostX
- Candy (RIB)
- Estm8
- SigmaEstim
- WinEst
- Sage Estimating
- HeavyBid
- B2W Estimate
- Stack
- Takeoff Live
- PlanSwift
- On-Center On-Screen Takeoff
- eTakeoff
- Active Takeoff
- Groundplan
- Countfire
- MeasureSquare
- RFMS Measure
- Callidus
- FloorView
- Planitar iGUIDE
- Matterport (Engineering scan)
- Leica Cyclone
- Faro Scene
- Z+F LaserControl
- Topcon ScanMaster
- Riegl RiScan Pro
- Maptek I-Site
- PointCab
- Undet
- CloudCompare
- MeshLab
- Discreet3D
- 3D reshaper
- 3DReshaper Meteor
- Leica CloudWorx
- Aveva LFM
- Pointfuse
- Viametris
- NavVis IVION
- IndoorViewer
- GeoSLAM Hub
- Hover
- EagleView
- RoofingCAD
- AppliCad
- IMSI FloorPlan
- Graphisoft EcoDesigner
- EnergyPlus
- DesignBuilder
- IES Virtual Environment
- OpenStudio
- TRNSYS
- Sefaira
- Cove.tool
- One Click LCA
- Tally
- EC3
- WUFI (Hygrothermal)
- Cabinet Vision (Hexagon)
- IMOS iX
- WoodWOP (Homag)
- TopSolid'Wood
- Pytha
- 2020 Design Live
- Winner Design (Compusoft)
- KitchenDraw
- Polyboard
- StairDesigner
- Woodwork for Inventor
- SWOOD (SolidWorks add-in)
- SketchList3D
- Mozaik Software
- Microvellum
- Promob
- Corpus
- PaletteCAD
- SmartCabinet
- Cabinet Solutions
- BluePrint-PCB
- Proteus VSM
- ALPHACAM
- Planit Fusion
- ArredoCAD
- LogiKal (Orgadata)
- SchüCal
- ReynaPro
- Klaes (Windows/Doors)
- Athena (AutoCAD Facade plugin)
- HAP (Hourly Analysis Program - Carrier)
- Trace 700 (Trane)
- Trace 3D Plus
- Elite Software RHVAC
- Wrightsoft Right-Suite
- MagiCAD
- Trimble MEP
- DuctSize
- FireCAD
- HydraCAD (Fire Sprinklers)
- AutoSPRINK
- SprinkCAD
- Canute
- Pipe-Flo Professional
- AFT Fathom
- AFT Arrow
- T-SOL (Solar Thermal)
- PV*SOL (Photovoltaics)
- PVSyst
- BlueSol
- Shoemaster
- RomansCAD
- Delcam Crispin
- ICAD3D+
- MindCAD
- Optitex
- Lectra Modaris
- Gerber AccuMark
- Clo3D
- Browzwear
- TukaCAD
- Gemini CAD
- Wild Things
- PolyPattern
- StyleCAD
- CAXA (China’s leading CAD)
- ZWCAD (ZWSOFT)
- GstarCAD
- PC-CAD
- KOMPAS-3D (Russia - ASCON)
- T-FLEX CAD (Top Systems)
- nanoCAD (Nanosoft)
- ADEM
- Ichicad (Japan)
- RootPro CAD
- CADCity
- DynaCAD
- Caddy (Europe)
- Spirit (Softtech)
- DataCAD
- Sema CAD (Germany)
- Dietrich’s (Timber engineering)
- Cadwork
- HsbCAD
- Vertex BD
- Petra (IHS Markit)
- Kingdom (Seismic)
- Petrel (Schlumberger)
- JewelSuite
- RMS (Emerson)
- GOCAD
- Move (Petroleum Experts)
- Oasis montaj
- Leapfrog Energy
- RockWorks
- LogPlot
- Strater
- Voxler
- Minex
- Deswik.CAD
- OpenFOAM (Fluid Dynamics)
- M-SASH
- SU2 (Stanford University Unstructured)
- Palabos
- SimScale (Cloud CAE)
- FEATool Multiphysics
- Elmer FEM
- CalculiX
- Z88Aurora
- Code_Aster
- Code_Saturne
- Gid
- Gmsh
- Netgen
- Engrid
- Discretizer
- PrePoMax
- LISA FET
- Impact Finite Element
- Tochnog
- OOFELIE
- Cenaero
- Pam-Distortion
- Sysweld
- ProCAST
- QuikCAST
- Magma5
- AnyCasting
- ADSTEFAN
- Flow-3D Cast
- Transvalor Forge
- QForm
- DEFORM
- Simufact Forming
- AutoForm
- PAM-STAMP
- Logopress
- Stampack
- JStamp
- Dynaform
- FastBlank
- BlankWorks
- CostOptim
- Progression
- Visi-Blank
- FTI FormingSuite
- COMSOL Designer
- Simcenter Star-CCM+
- Siemens Simcenter 3D
- Ansys Twin Builder
- PVsyst
- SAM (System Advisor Model - NREL)
- HelioScope
- Aurora Solar
- Solargis
- Meteonorm
- WindSim
- WAsP (Wind Atlas Analysis and Application)
- WindPRO
- OpenWind
- Bladed (DNV)
- FAST (NREL Wind)
- QBlade
- Tidal Bladed
- OrcaFlex (Offshore cables/mooring)
- ProteusDS
- Flexcom
- DeepLines
- Shearwater
- Ariane
- HydroDyn
- AQWA (Ansys)
- SACS (Bentley)
- Moses (Bentley)
- GRLWEAP (Pile driving)
- AllPile
- Envi-met (Microclimate)
- TAS (EDSL)
- IES-VE
- Green Building Studio
- Insight 360
- Ladybug Tools
- Honeybee
- Pollination
- ClimateStudio
- UrbanSim
- CityEngine (Esri)
- Plexos (Power market)
- Aurora (Energy)
- PROMOD
- RoseCompact
- HOMER Pro
- iHOGA
- RETScreen
- EnergyPRO
- TRNSYS
- EPlan Cogeneration
- Polysun
- T-SOL
- Solar Pro
- RoboGuide (Fanuc)
- RobotStudio (ABB)
- MotoSim (Yaskawa)
- KUKA.Sim
- Visual Components
- RoboDK
- Delfoi
- Octopuz
- Process Simulate (Siemens)
- Robcad
- RobotExpert
- Delmia (Dassault)
- FlexSim (Logistics)
- AnyLogic
- Simio
- Arena (Rockwell)
- Witness (Lanner)
- AutoMod
- Plant Simulation (Tecnomatix)
- Webots (Open Source)
- Gazebo (ROS)
- V-REP (CoppeliaSim)
- Isaac Sim (Nvidia)
- PyBullet
- MuJoCo
- Actin (Energid)
- RoboLogix
- Workspace5
- Easy-Rob
- RobotWorks
- Artic
- SprutCAM Robot
- Eureka Robot
- Cenit FastSuite
- Alma CAM
- Hyperdent
- WorkNC Dental
- Exocad
- InLab (Sirona)
- Blue Sky Plan
- Sirona CEREC
- Dental Wings
- Zirkonzahn
- Amann Girrbach
- MillBox
- Sum3D
- Planmeca Romexis
- Stratasys GrabCAD Shop
- Markforged Eiger
- Carbon Synapse
- AutoShip (Hydrostatics)
- Maxsurf (Stability)
- Orca3D
- Hydromax
- Multiframe
- Shipflow
- ShipWeight
- NavCAD
- PropCad
- VesselView
- PV Elite (Pressure Vessels)
- Compress (Codeware)
- NozzlePRO
- FE-Pipe
- Tank (Hexagon)
- AMETank
- Cyclect
- Opti-Coupe (Cutting optimization)
- MaxCut
- CutLogic
- Cutter
- Plus 2D
- Magic-Cut
- Ardis
- Radan (Sheet metal)
- Lantek Expert
- Metamation
- Merry Mechanization (SMP)
- SigmaNEST
- JetCAM
- Eurosoft
- Cadman (LVD)
- BySoft (Bystronic)
- Trutops (Trumpf)
- Amada AP100
- Mazak Mazacam
- Striker Systems
- MetaCAM
- PepS
- Camtek
- Optiscout
- Engview (Packaging)
- ArtiosCAD
- Impact (Arden)
- Kasemake
- Picador
- PackMage
- Cape Pack
- Tops Pro
- StackBuilder